Overview

The fast, affordable Stratus II Jumbo offers a surprising host of options and unsurpassed flexibility at an equally surprising price point. The Stratus II Jumbo is built on proven Anatol technology providing incredible reliability day in and day out.

The Stratus II Jumbo is available in 4 or 5-color models, with a maximum image area of 40” x 30". Engineered for longevity, the Stratus II Jumbo features a heavy-duty steel frame to support high speeds and smooth production cycles. The large column with thrust ball bearings and the low profile side-screen holders allow for precise registration stability and ink loading.

The Stratus II Jumbo also offers reliable print power that supports even the most demanding job requirements. Standard features like independent squeegee and flood bar speed adjustments, adjustable side screen holders, independently set angle and calibrated pressure adjustments, and independent (print head) print, reset, and print/flood speed controls allow for ease of use, rapid set up and change over. Additionally, pneumatic clamps help hold the Stratus II Jumbo’s frames tight -- allowing for rapid screen loading.

Other standard features include:

• Easy to use membrane button control panel
• Membrane control buttons located at the end of each print head for ease of set.

• Front/rear stroke adjustment
• Squeegee/flood bar angle adjustment
• Gauged click-type squeegee/flood depth adjustments
• Gauged click-type central off contact
• Screen width

• Squeegee/flood bars
• Pallets (also offered in slide-style mounting system)
• Front loading/unloading of screens

• Tool-less head individual off-contact
• Foot pedal
• Full variety of quartz and infrared flashes

With Anatol you get more choices, better quality, and more capabilities. Take a close look at the Stratus II -- built to give reliable performance, exceptional handling, and customer-pleasing quality start to finish.

Quick Facts

• 4 or 5 Color Models
• Stations: 6
• Maximum Image Area 40" x 30"
• Digital Microprocessor Main Control Panel
• Individual Print Head Controls
• Tool-less Adjustments
• Quick Release Systems
• Servo Indexer & A/C print heads are standard on all models
• Choice of Either a Large Format Rapid Wave Quartz Flash or Head Mounted Moving Quartz Flash
• Safety Bars at Heads and Load/Unload Stations
• Skip Shirt Button Located on Main Control Panel and at the Load/unload Stations
• Side Screen Holders

• Individual Head Off Contact
• Foot Pedal Control for Manual Mode

Standard Features

• Digital Microprocessor Control
• Easy to navigate membrane button panel
• Digital LCD display screen
• Real time production information showing print count and speed (pcs/hr)
• Self-diagnostic featuresAutomatic sequential start/finish function
• Multiple print strokes (1~9) per head
• Sample print feature-print one shirt automatically
• Dwell times allows adjustments for cycling speed and cool-down time
• Full flash programming including dwell at the main control panel
• Air pressure shut off control

• Print speed
• Flood speed
• Pneumatic screen clamping
• Squeegee pressure
• Free wheel
• Indexing
• Table lift and lower
• Test Print

• Micro switch safety bars to insure a reliable and safe environment for press operators
• Heavy-duty steel frame to support high speeds and smooth production cycles
• Large column with thrust ball bearing provides registration stability
• Small footprint accommodates tight spaces
• Quality engineering-allows for longevity and reliability
• Two-year limited warranty

All Anatol equipment is designed to surpass industry standards and can be used with other manufacturers’ equipment such as pre-press registration systems and pallets.

European Committee for Standardization® (CE) and Underwriters Laboratories® (UL) compliant: Built to specifications established by both CE and UL.

• Gauged, front/rear stroke adjustment-easily slides into lock/unlock positions
• Gauged, click-type squeegee/flood bar knobs-provides operator-friendly depth adjustment
• Gauged, squeegee/flood bar angle adjustment-allows single-handed locking in a 0º-30º range, marked in 5º increments
• Three-point micro registration-provides quick and accurate screen positioning (front to back, left to right and rotational)
• Gauged, click-type central off-contact-precisely adjusts all pallets simultaneously and allows 0-3/8 inch range in .005 increments per click

• Squeegee/flood bars-snap in and out with the flip of a lever for load and lock operation
• Pallet locking systems--load and lock with one lever (also available with slide-style pallet mounts)
• Front loading screens for maximum productivity, impeccable registration and simple screen slide out

• Standard on all models
• Allows clockwise and counter-clockwise indexing of pallets
• Higher production rates with full control of acceleration and deceleration
• Ball bearing lead screw with a recirculation internal lubrication system
• Half index to right or left
• Maintenance-free, only requiring periodic oil level check

• Fully variety of both infrared and quartz flashes offered
• Installation/removal is simple and quick--just slide in, switch on air clamps and plug in
• Different mode setting depending on style of flash being used
• Supports up to four flash units with full control at the machines main control panel
• The open construction at the front of the print head will allow some of the other manufacturers flash units on stands work in the print heads (all non-Anatol flashe units will need to have independent control capabilities)

• Individual off contact--allows fast, fingertip adjustment of all stations
• Squeegee pressure regulator
• Foot pedal control--allows remote control of manual cycle
• Screen width extenders
• Pallet locator for slide-style pallets only
• Front and rear screen clamps

Specifications

To learn more about the Stratus II Jumbo or our other innovative Anatol textile print solutions, please call 1-866-426-2865.